Page Comparison

...

1. Upload Dynatrace certificate into STRUST (if not yet done).

2. Administrator->Connection Setup->Upload Scheme
   

   

3. Define Group Def uploading filters to create ZTRACE_ONLY and ZLOGS_ONLY filters

4. On the right side of the screen press Create OpenTelemetry endpoint
   

   

5. Populate connection details
   

   

6. Check the connection
   

   

   
   In case error message is shown, troubleshooting might be required to ensure outbound connectivity is allowed and SSL is setup properly.

7. Create Group Definition filter to limit send only trace data
   a. Open Event Types Filter using the button below (left side of the screen)

   Image Removed

   b. Populate Filter name and description like shown on the screen
   

   Image Removed

   c. Press the button in Group Def column
   Image Removed
   d. Define following filter criteria and confirm

   Image Removed

   e. Save the Filter maintenance dialog and use green confirmation button to close the screen
   

   Image Removed

8. Drag and drop the endpoint from the right side of the screen to the Default Scheme node on left side of the screen. Set the Active flag and populate the filter as shown below:
   

   

   Filter definition is mandatory for this endpoint!

9. Double-click on all existing Log endpoints and assign the ZLOGS_ONLY filter to filter out trace data
   

   Image Added

   Filter definition is mandatory!

10. Confirm the dialog and Save changes in Upload Scheme screen.

11. Activate STATS_TRACE extractor in Administrator->Setup Group Def menu option as described here: https://powerconnect.atlassian.net/wiki/x/AYCQuw